|
Unispense II
 Accurate, repetitive, automatic dispensing!
- Moderately Priced
- 1 to 830 ml Volume Setting
- 0.5 to 5 Second Delay Setting
- No Pistons or Valves to Jam
- Less Than One Minute to Change Tubes
- Audible Signal at End of Filling Cycle
- Accommodates Liquids of Various Viscosity
The Unispense II is a versatile, moderately priced alternative to manual liquid dispensing.
Unispense II allows you to dispense unit dose liquids and larger volumes accurately and repeatedly. You can vary the size of the Unispense tubing assembly and the volume setting from 1 ml to 830 ml. You can also change the delay between dispensings from 0.5 to 5 seconds. Keep the manual dispense button or foot switch depressed for continuous pumping.
The single speed peristaltic pump accommodates liquids ranging in viscosity from aqueous solutions to medium syrups. Unispense® II records the number of doses and an audible signal at the end of the filling cycle frees you from visually monitoring the unit.
There are no valves or pistons to become clogged or "frozen" so downtime is reduced. And, the used tubing assembly is removed and replaced with a fresh assembly in less than one minute. When used with the Wheaton IV Additive Pump Chamber Assembly, Unispense® II efficiently prepares IV Additive admixtures and fills sterile syringes for injectables.
Automated Liquid Dispensing
|
|
1.5m (5-Foot) section silicone or Viton tubing with a wall thickness of 2.3 mm and borosilicate glass sinker on one end and polypropylene delivery nozzle on the other end.
|
|
3 mm to 8 mm Internal Diameter
|
|
|
|